INCREDIBLE AMOUNT OF LIGHT
In LED STINGRAY MARK II, three high-performance next-generation CREE LEDs were used.
Due to this fact – and thanks to the electronics used in the device – the torch emits a maximum of 1300 lumens light output of cool white color temperature.
The triple integrated lens focuses the light into a 16° beam with a 30° regular corona.
UNIVERSAL LIGHT SOURCE
Due to its lightness power, focus, and small size LED STINGRAY MARK II will be perfect as an all-around, compact light source as well as a reliable and strong backup light source.
LONG OPERATING TIME
The STINGRAY MARK II LED torch is powered by a 21700 Li-Ion battery that provides long runtime (about 2 hours) and is characterized by a long lifespan (up to 500 charging cycles with up to 75% capacity) as well as a high level of safety.
Due to the built-in PCM, the battery is protected against overcharging, over-discharge, and short-circuit.
CHARGING STATUS AND CONVENIENCE OF USE
The battery is equipped with a very convenient charging system that uses the built-in USB-C port.
Rechargeable 21700 Li-ion batteries can be charged from any power source (charger, power bank, laptop, desktop computer, or a car USB charger).
The battery can also be charged with chargers dedicated to standard 21700 Li-Ion batteries.
Additionally, there is a built-in bi-color LED in the positive pole of the battery. It informs the user about the current charging status (red indicates the charging process / blue means that the battery is fully charged).
Due to the lack of memory effect, the batteries can be recharged at any time without negatively affecting their capacity and battery life.
DURABLE AND RELIABLE
The body of the torch is made of a light but very rigid and mechanically durable polymer (polyacetal, POM). This material is highly resistant to environmental factors (highly saline water, UV radiation, high temperature).
The head is molded with precision from a single piece of aluminum. The aluminum alloy is resistant to corrosion in sea water.
LED STINGRAY MARK II is protected by 6mm of tempered glass resistant to scratches and mechanical damage.
LED STINGRAY MARK II is constructed in such a way that it ensures its safe usage at a depth of up to 200 m.
What is more, the aluminum head of LED STINGRAY MARK II is covered with a protective layer of a hard anode. Compared to conventional coatings, the hard anodic coating is thicker and provides exceptionally high resistance to mechanical damage (e.g. scratching or abrasion), as well as additional protection against corrosion.
All markings and descriptions on the torch are laser-engraved, which makes them durable, easy to read, and aesthetically pleasing, no matter how long the torch is used.
Due to its shape and compact size, LED STINGRAY MARK II is very comfortable to use and fits perfectly in the hand, even when with a thick glove on.
The torch can be easily attached to the D-ring of a harness. It can also comfortably fit in the pocket of a dry suit or a jacket
Since we only have one habitable planet, everyone has to play a part in protecting the environment.
At Ammonite System, we are very much interested in preserving the environment, and we’re doing our part.
When deciding on boxes, bags, or containers, we have chosen to use recyclable cardboard packaging instead of plastic.
Recyclable packaging is a great way to extend the life of previously used materials and positively impact sustainability.
UMBILICAL LIGHT KIT CONTAINS:
|light output||up to 1300 lm|
|total power||10 W|
|material||alumminium alloy – hard anodised /DELRIN®|
|spot angle||12º total angle - 30º|
|max. length||120 mm|
|type of optics||1 x tripple lens|
|max. diameter||40 mm|
|colour temperature||cool white|
|front glass||6 mm tempered|
|power source||1 x 21700 protected rechargeable cell with USB type-C charging port|
|weight||137g (without batteries) 210g (with batteries)|
|switch type||by tightening on/off|
|weight in water||95 g|
|max. operation depth||200 m|
|light source||3 × high efficiency CREE LED|